Devine Hydraulics
  • 800-922-4154
  • CAREERS
  • CONTACT US
  • Products
    • Hydraulic Power Units
    • Custom Tubes & Hoses
    • Hydraulic Parts & Components
  • Capabilities
    • Cylinder Repair
    • Design
    • Manufacture
    • Mobile Hydraulic Repair
    • Preventative Maintenance
    • Specialty Services
  • About Us
    • Careers
    • News & Blog
    • FAQs
    • Testimonials
  • Industries
    • Agriculture
    • Industrial
    • Commercial
    • Mobile
    • Marine
    • Equipment Rental
    • Construction
    • Waste/Recycling
    • Transportation
    • Government
      • Municipality
      • State
      • Federal
      • Prime
      • Teaming
Select Page
Hydraulic Flushing and Filtering Restores Function to CT Bridge

Hydraulic Flushing and Filtering Restores Function to CT Bridge

by wpengine | Apr 14, 2021 | Oil Filtration & Fluid Management, Onsite

Hydraulic Flushing and Filtering Restores Function to CT Bridge Pi.1415926535, CC BY-SA 3.0, via Wikimedia Commons As New England’s leading hydraulic fabrication and service providers, our team is always ready to respond to emergency calls at a moment’s notice. This...
Emergency Repair Restores Operations for Industrial Recycling Facility

Emergency Repair Restores Operations for Industrial Recycling Facility

by Brian Devine | Jun 18, 2020 | Onsite

Emergency Repair of Large Industrial Equipment Puts Metal Recycling Shredder Back In Operation There are some hydraulics or equipment repair jobs that can be done anywhere. However, there are also jobs that, due to the size of the machine or other factors, must be...
Pre-Positioning Hydraulic Power Unit Prior to Installation

Pre-Positioning Hydraulic Power Unit Prior to Installation

by Guest Contributor | Dec 11, 2019 | Onsite

Devine Hydraulics: Moving hydraulic power unit into place prior to installation At Devine Hydraulics we have the experience, equipment, and space in our facility to work on your job. At other times, as above, we come to you. If you have a Hydraulic issue that needs...

Recent Blogs

  • An example of hydraulic machinery operating in a large paper production facility.Hydraulic Preventative Maintenance Strategies Global Packaging Producer
  • A black hydraulic hose with severe degradation of the rubber outer covering.How To Inspect Hydraulic Hoses
  • A Virgina Class submarine rising out of the ocean, similar to the type of submarine that would require the hydraulic submarine test stands discussed in this article.Redesigning and Modernizing Hydraulic Test Stands for Submarine Accumulators
  • A hydraulic specialist in a blue jacket and yellow safety equipment inspects machinery and pipes.Why You Need a Hydraulic Specialist on Your Project
  • A worker in a blue shirt and yellow safety vest uses hydraulic equipment on a construction site.What Happens If Your Hydraulic Fluid Is Contaminated?

Devine Hydraulics, Inc.
179 Gallivan Lane,
Uncasville, CT 06382

P. O. Box 91
Oakdale, CT 06370
Ph: 860.859.1650     Fax: 860.859.3711  Email

The Company is committed to profitable growth in its core business of service and repair of hydraulic equipment and to continuing expansion through distribution, design and manufacturer of associated equipment. Our focus is to always work for the satisfaction of our shareholders, customers and employees and to be a benefit to the local community.

CALL NOW: 800-922-4154

  • Home
  • Capabilities
  • About Us
  • Careers
  • Industries
  • Government
  • Testimonials
  • News/Blog
  • Sitemap
  • Contact Us

ISN certified hydraulic services

© 2023 Devine Hydraulics, Inc.  |  Privacy Policy

©2019 Troy Industrial Solutions
https://www.youtube.com/watch?v=YVK6zagjBTI&feature=emb_logo
https://www.youtube.com/watch?v=YVK6zagjBTI&list=PLsJM7W--QavBqcjEJSOXBq-FJCbLxCPeA&index=2&t=49s
https://www.youtube.com/watch?v=tSqSWpwLohc&list=PLsJM7W--QavBqcjEJSOXBq-FJCbLxCPeA&index=5&t=0s
https://www.youtube.com/watch?v=epkJK6xcfOo&list=PLsJM7W--QavBqcjEJSOXBq-FJCbLxCPeA&index=3&t=0s
https://www.youtube.com/watch?v=-1HCSyL1Wqs&list=PLsJM7W--QavBqcjEJSOXBq-FJCbLxCPeA&index=4&t=0s

PUMP AND MOTOR
When a hydraulic Pump repair or a hydraulic motor repair estimate is created you will receive four price ranges.

Typical Price Range – This is a broad range that will give you an idea of what a typical hydraulic pump repair or hydraulic motor repair will cost, without knowing the actual problem with the hydraulic pump or hydraulic motor.

Low Range – This range is for a hydraulic pump or hydraulic motor that is working fine, and has no visible wear and is just leaking.

Median Range – This range is for a hydraulic pump or hydraulic motor that has visible shaft wear or may have a performance problem.

High Range – This range is for a hydraulic pump or hydraulic motor that has visible shaft wear and a performance problem. Also includes at the high end a possible exchange price.

Note:
Brand Names – such as Caterpillar, Eaton, Parker, Rexroth, Vickers, Kawasaki, Sundstrand, Commercial, and Dynapower may or may not include the use of original replace parts where quality non-OEM replacement parts are available at a less expensive cost.

ROD CYLINDER
When a hydraulic cylinder repair estimate is created you will receive four price ranges.

Typical Price Range – This is a broad range that will give you an idea of what a typical hydraulic cylinder repair will cost without knowing the actual problem with the hydraulic cylinder.

Low Range – This range is for a hydraulic cylinder that is working fine, and has no visible wear or damage, maybe just leaking. (Careful inspection of hydraulic cylinder chrome rod must show no visible imperfections, scratches, dings, pits, etc.)

Median Range – This range is for a hydraulic cylinder that has a performance problem and / or has visible wear or damage to the hydraulic cylinder chrome rod or hydraulic cylinder housing / barrel. (Careful inspection of hydraulic cylinder chrome rod shows visible imperfections, scratches, dings, pits, etc.)

High Range – This range is for a hydraulic cylinder that has a performance problem and / or has visible wear or damage to the hydraulic cylinder chrome rod and / or hydraulic cylinder housing / barrel and / or hydraulic cylinder piston and / or hydraulic cylinder gland. (Careful inspection of hydraulic cylinder chrome rod shows visible imperfections, scratches, dings, pits, etc.)

Note:
Brand Names – such as Caterpillar, Case, John Deere, Komatsu, Bobcat, Kobelco, JCB, Hi-Reach, JLG, Koering, and Volvo may or may not include the use of original replacement parts where quality non-OEM replacement parts are available at a less expensive cost.

TELESCOPIC CYLINDER
When a telescopic hydraulic cylinder repair estimate is created you will receive four price ranges.

Typical Price Range – This is a broad range that will give you an idea of what a typical telescopic hydraulic cylinder repair will cost without knowing the actual problem with the telescopic hydraulic cylinder.

Low Range – This range is for a telescopic hydraulic cylinder that is working fine, and has no visible wear or damage, maybe just leaking. (Careful inspection of telescopic hydraulic cylinder stages must show no visible imperfections, scratches, dings, pits, etc.)

Median Range – This range is for a telescopic hydraulic cylinder that may have a performance problem and/or has visible wear or damage to one telescopic hydraulic cylinder stage or hydraulic cylinder housing/barrel. (Careful inspection of telescopic hydraulic cylinder stages shows visible imperfections, scratches, dings, pits, etc.)

High Range – This range is for a telescopic hydraulic cylinder that may have a performance problem and/or has visible wear or damage to two telescopic hydraulic cylinder stages and/or hydraulic cylinder housing/barrel and/or hydraulic cylinder piston and/or hydraulic cylinder gland. (careful inspection of telescopic hydraulic cylinder stages shows visible imperfections, scratches, dings, pits, etc.

Note:
Chrome Plating is not included – If chrome plating is required expect the cost of hydraulic repair to be two to four times that which is created.
Brand Names – such as Caterpillar, Parker, Commercial, Custom Hoists, Hyco and Fruehauf may or may not include the use of original replacement parts where quality non-OEM replacement parts are available at a less expensive cost.

HOSE ASSEMBLY
When a hydraulic hose repair estimate is created you will receive four price ranges.

Typical Price Range – This is a broad range that will give you an idea of what a typical hydraulic hose repair will cost without knowing the actual types of hose ends that are on your hose assembly.

Low Range – This range is for a hydraulic hose that has straight type NPT fitting on both ends of the hydraulic hose assembly and / or high volume / quantity.

Median Range – This range is for a hydraulic hose that has NPT straights, jump sizes … JIC, SAE, O-Ring Boss, Flat Face straights type fitting on each end of the hydraulic hose assembly.

High Range – This range is for a hydraulic hose that has JIC, SAE, O-ring Boss, Flat Face – angle type, long drop, jump sizes … Flanges and Metric – straights, angles, long drops, jump sizes on both ends of the hydraulic hose assembly.

Note:
Brand Names – such as Eaton, Aeroquip, Weatherhead, Parker, Gates expect price to be on the high end of each Low, Median and Upper Ranges